en
Contact us
Vladimir Jezek
Vladimir Jezek
Vladimir Jezek
Head of Sales Department

Steam condenser turbines

In addition to delivering its own turbines, main condenser and its pumps, PBS also provides a complete condensate management system. If requested by the customer, it also provides the exhaustion of steam from the turbine.
  • 200 years of experience in designing high-quality and efficient steam turbines
  • The parameters of the turbomachine are designed according to the customer's requirements
PBS.TopImage.Btn.Scroll
Steam condenser turbines TG
Medium-pressure and high-pressure multistage single-shaft axial turbines are placed in power units for power generation and mechanical drives.

Steam condenser turbines TG M
Medium-pressure multistage single-shaft axial turbines are placed in low output power units for power generation and mechanical drives.

Steam condenser turbines TG M II
Medium-pressure multistage turbines for low output power units and mechanical drives.
These are double-shaft turbines with a high-pressure and low-pressure TG M module, which are connected in series. They are therefore also suitable for double-pressure steam boilers, as they allow steam to be supplied to the turbine at two pressure levels.

Steam condenser turbines CSTG
Low-pressure multistage single-shaft axial turbines for large volumetric flow rates of inlet steam are placed in low-pressure low output power units, or on the outlets or exhausts of front-end large back pressure turbines.
They increase electricity production when the exhaust heat or steam from these turbines declines.

Steam condenser turbines CSTG II
Medium-pressure multistage turbines for low output power units.
These are double-shaft turbines with a high-pressure and low-pressure CSTG module, which are connected in series. They are therefore also suitable for double-pressure steam boilers, as they allow steam to be supplied to the turbine at two pressure levels.
 

Turbine parameters

Technical parameters Steam condenser turbines TG
Inlet steam: pressure up to 11 MPa., max. temperature 545 °C
Type of steam exhaustion: regulated and unregulated
Governing: nozzle or throttle governing with one control valve
Clutch power: from 3 MW do 30 MW
Use: drive for electric generator, compressor, pump, fan
  delivered on a common frame with a gearbox
 
Technical parameters Steam condenser turbines TG M
Input steam: pressure up to 4.5 MPa, temperature up to 480 °C, flow rate up to approx. 20 t/hr.
Type of steam exhaustion: regulated and unregulated
Outlet steam: pressure from 7 kPa to approx. 40 kPa
Governing: nozzle or throttle governing with one control valve
Clutch power: from 600 kW do 3 MW
Use: drive for electric generator, compressor, pump, fan
  delivered on a common frame with a gearbox
 
Technical parameters Steam condenser turbines TG M II
Input steam: pressure up to 4.2 MPa, temperature up to 480 °C, flow rate up to approx. 20 t/hr.
Type of steam exhaustion: regulated and unregulated
Outlet steam: pressure from 7 kPa to approx. 40 kPa
Governing: nozzle or throttle governing with one control valve
Clutch power: from 600 kW do 3 MW
Use: drive for electric generator, compressor, pump, fan
  delivered on a common frame with a gearbox
  Special versions are used for direct drive of high speed turbochargers (without a gearbox).
Technical parameters Steam condenser turbines CSTG I
Input steam: absolute pressure 0.1 – 1,5 MPa, temperature 100 - 350 °C, flow rate up to approx. 100 t/hr.
Type of steam exhaustion: regulated and unregulated
Outlet steam: absolute pressure from 5 kPa to approx. 40 kPa
Governing: nozzle or throttle governing with one control valve
Clutch power: from 600 kW do 10 MW
Use: drive for electric generator, compressor, pump, fan
  delivered on a common frame with a gearbox
 
Technical parameters Steam condenser turbines CSTG II
Inlet steam: pressure up to 4.5 MPa, temperature up to 480 °C, flow rate up to approx. 50 t/hr.
Type of steam exhaustion: regulated and unregulated
Outlet steam: pressure from 5 kPa to 40 kPa
Governing: nozzle or throttle governing with one control valve
Clutch power: from 600 kW do 3 MW
Use: drive for electric generator, compressor, pump, fan
  delivered on a common frame with a gearbox
  Special versions are used for direct drive of high-speed turbochargers (without a gearbox).

Why us?

Years of experience
Years of experience
PBS currently has 200 years of experience in the construction of high-quality and efficient steam turbines. Itis a top manufacturer ofcondensing steam turbines.
Universal use in many industries
Universal use in many industries
Steam turbines are suitable for a wide range of industries. Their use iseffective in many ways. 

Service, spare parts and overhauls of power engineering equipment

We offer our customers a comprehensive range of turbine set, boiler and boiler island maintenance services.

We provide all repairs in the framework of revisions, as well as outside of this framework in the case of sudden failures or breakdowns. The turbine repairs can range from medium repairs of individual components to overhauls of machinery including auxiliary equipment.